How To Put Canon "Mg2420" In Service Mode

At that place are a few things to know about replacing the ink cartridge.

If you remove the cartridge, replace information technology immediately. If either the blackness or colour cartridge isn't installed, an error occurs and the machine can't print.
Employ a new ink cartridge. A used ink cartridge may cause the nozzles to clog and it won't tell you when it'south time for a replacement.
Don't leave a new ink cartridge out in the open later on the packaging is removed. This causes the cartridge to dry out, and the machine may not operate properly once the cartridge is installed.
The inside of the machine may exist stained with ink. Be conscientious not to stain your hands or clothing when replacing the cartridge. Yous tin use a make clean white cloth to gently wipe off any ink inside the machine.
To maintain optimal print quality, use the cartridge within six months of offset use.

Brand sure the printer ability is on.
Retract the paper output tray and the output tray extension.
Open the cover. The cartridge holder moves to the replacement position. Wait until the holder stops moving. Don't touch it or endeavour to stop information technology.

If the cover is left open up for more than than 10 minutes, the cartridge holder may move and the Alarm lamp light. If this happens, close then reopen the cover.
Button down on the ink cartridge until it clicks, then remove it (see image slide evidence below).

Don't touch the electric contacts(A)or print head nozzle(B). The motorcar may not print properly if you touch them.

Take the new ink cartridge out of its package and gently remove the protective tape (C).
Insert the cartridge into the holder at a slant (see epitome slide bear witness below).
Push the cartridge in and up firmly until it snaps into identify. The color cartridge goes on the left and the black on the correct.

Insert the cartridge so it doesn't hitting the electrical contacts on the cartridge holder. Don't bear on the metallic parts or other parts inside the machine.
Check to brand sure the cartridges are installed properly and lined up evenly.
Shut the embrace.
Perform the print head alignment .
The machine starts cleaning the print head automatically. Don't perform whatsoever other operations until the machine completes the cleaning.